How To Get The Look Of Shiplap Without All The Hassle
Do you love the look of shiplap, but not the hassel? I will show you how to achieve this in a very simple way!
I can hardly believe that it’s been a full year since I pushed all my fears aside and completed the first project for our total dining room makeover! My vertical faux shiplap wall was such a simple DIY project, but taking what I thought was such a big step scared me!
For this week’s edition of The Best Of Worthing Court, let’s take a look back at that project (with updated photos), the supplies that we used and what an easy project it was. If there’s a project that you want to try in your own home that scares you, I hope this will inspire to charge full steam ahead anyway. You might just be surprised at the boost of confidence you’ll have in the end.
Even though I finally worked up my own nerve to give my idea a try, trying to talk Pookie into my “vision” was whole ‘nother story. Click HERE to read my tips for How To Decorate When You Can’t Agree. Y’all have left me some wonderful comments, btw. I’m glad to know that we aren’t the only ones who struggle sometimes.
Say hellooo gorgeous to my perfect planked wall! I’m excited because I love the planked wall, but I’m even more excited because it was so fast and so easy to do.
Maybe you dread all of the work and time that would be required to cut sheets of plywood into strips or hanging tongue-in-groove planks one by one. There’s no long drawn out project here – this method is easy!
Pookie and I completed this wall in roughly two – three hours (not counting shopping, caulking or painting). What’s the secret? Paneling. Yep, plain old ordinary, everyday paneling.
To be more specific, this is the product that we used from Lowes.
They do have flat paneling too (that looks more like wide boards with groves in between), but I thought that this single bead paneling looked more like individual wooden boards. Plus I really like the texture and dimension of it.
Now, I admit that I was a little scared at the thought of putting any kind of paneling on any wall in my house. I kept having flashbacks to the 70’s, when I had an entire den full of that cheap, awful brown stuff. But, after thinking about it, I decided to take the plunge and see how it would look. I’m so glad that I did!
Things that we had to consider:
- Hang the paneling horizontally or vertically? In the end, I decided that I liked the vertical look for the dining room. In my mind, it seemed that horizontal planking would be a little more rustic looking and I wanted something a little dressier for the dining room.
- How far up the wall to take the paneling – all the way to the top or only about 5′ or 6′? I knew that I wanted to be able hang anything that I wanted to on the wall without some kind of trim getting in the way, so I decided to just mount it at the top of the baseboard and take it all the way up to the bottom of the existing crown moulding.
- How to handle the fact that our wall space was 98″ tall, but the paneling was only 96″ tall. We decided to cut the sheets into two 48″ tall pieces and hang them so that there was a 2″ space about halfway up the wall that we could cover with a piece of trim that resembles a chair rail.
With all of our decisions made and measurements in hand, we made our way to our local Lowes, where we were able to get the paneling cut into the exact sizes that we needed. Our wall measured 177″ wide x 98″ tall (from the top of the baseboard to the bottom of the crown mould), so we had to buy four sheets of paneling that were then cut into a total of eight pieces.
To attach it to the wall, we ran a bead of construction adhesive around all four sides of each piece of paneling, plus a few dabs in the middle. Then used a few brad nails (with a nail gun) to hold it in place until the adhesive dried. If you don’t have a nail gun, they have small nails (that are made especially for paneling) that you can use with a hammer.
When the paneling was in place, every seam and joint was caulked and then the entire wall was painted the same color as the rest of the trim – Sherwin Williams Pure White in semi gloss. I was a little worried about being able to see seams, but they aren’t visible at all.
After the paint was dry, I didn’t waste any time getting my vintage mantel hung and decorated! Maybe you remember it from the basement of our former home. Click HERE to get my step-by-step directions for making these easy Fixer Upper style hanging lanterns.
Want to see the before and after of my faux vertical shiplap wall? BTW, you can see the full BEFORE and AFTER reveal of the entire room, including how I painted all of my furniture, by clicking HERE.
AFTER
Pin it for later!
Sharing at THESE great parties.
Love the plank wall makeover! So good to know it can be done with good ol’ paneling! Who knew it could be so easy? Thanks for the inspiration!
Wow this looks amazing! I would love for you to join our party for #iDIYedthat.
This post is perfect for our new link party. Link below:
http://repurposeandupcycle.com/2017/03/07/idiyedthat-link-party-2/
Beautifully done! Such a simple thing that makes a huge impact! Thanks so much for sharing with us at Snickerdoodle!. Pinning too.
The difference between the before and after is stunning! Such a beautiful makeover, Suzy. Thank you for sharing at this week’s Project Inspire{d}. hugs
I am loving the shiplap look. I just love seeing what you added to your beautiful home. Thank you for sharing at Dishing it and Digging it link party. Thank you for stopping by every week.
Love the paneling and you have a great eye for decorating. Added to my Pinterest queue.
Absolutely gorgeous! I may just have to try this. Thanks for linking up to Inspiration Monday!
Love this vertical, clean and classy looking shiplap. I agree w/ you that vertical hanging rather than horizontal makes it look less more dressed up.
This looks really great, it reminds me a lot of the wainscoating board that was used in dining rooms. I like covering the whole wall and adding a chair rail. Thank you for sharing your lovely ideas !
Thank you for sharing your before and after on “How to get the look of Shiplack”. I plan on trying this
The finning room transformation is amazing!
What a great idea and well executed!! I love it. ?
The paneling really adds texture to your beautiful dining room-enjoy it!!
Such a huge difference, the ship lap made ALL the difference. I’ve been wanting to try this to my wall but hated the thought of all the cutting and measuring, not to mention the time it would take. Your idea is brilliant!
Where did you find your light fixture that is over your dining room table? It’s beautiful!
Hi Lachelle. The fixture came from World Market.
Where did you purchase your beautiful rug?
Hi Theresa. You can find a link directly to the rug in this blog post: https://www.worthingcourtblog.com/dining-room-before-after/